Autel MaxiIM IM608 PRO Auto Key Programmer Diagnostic Tool
The Autel IM608 PRO KPA is a comprehensive key and immobilizer programming package of the MaxiIM IM608 Pro 10.1-inch Android touchscreen tablet, XP400Pro key and chip programmer, the wireless JVCI J2534 pass thru programming device and the Key Programming Adapter kit. The IM608 Pro enables key learning directly through the OBDII port for 85 percent of vehicles in North America. The tablet can read the immobilizer pins and password directly from the vehicle and store this information to use later when learning the newly programmed keys to the vehicle. The IM608 Pro is also an advanced diagnostics tablet featuring AutoVIN and AutoSCAN technology to automatically identify the vehicle and perform an all systems scan. The advanced diagnostics functions of the IM608 Pro include the ability to perform active test, coding and adaptations.
Autel IM608 Pro Main Features:
• In addition to the standard IM608, the IM608 PRO has an upgraded XP400 key programmer and better stability for MB key programming.
• Read & Clear Fault Codes | Short description & code provided (can clear faults & warning lights)
• Service Functions | Oil light / EPB / BMS / SAS / DAF etc
• Access Live Data | Data from the ECU/Modules/sensors displayed in real-time (Oxygen sensor-rich/lean etc)
• Actuation/Component Testing | Actuate (switch on/off) to diagnose functionality (relays, fans, locks etc)
• Coding Functions | Allows you to change vehicle parts that need to be ‘coded’ (Injectors, ABS, starters etc)
• Flashing/Reprogramming | Advanced updating/coding of ECU’s online through a J2534 pass-through flashing device
• Advanced Key Programming | IMMO functions, Transponder read/write/identify, MCU/EEPROM chip read/write
• XP400Pro Key and Chip Programmer
Autel IMKPA Key Programming Accessories Kit
IMKPA is a Key Programming Adapter Kit, compatible with the XP400Pro Key & Chip Programmer. Includes 12 adapters for the XP400Pro that enable Read/Write/Erase for Mercedes Benz ESL_W209 / W906 Data, for Mercedes Benz NEC Key Learning, for BMW EWS3 Key Learning and. For Volkswagen/AUDI/BMW/Benz Key Unlock. Compatible with the IM608PROKPA / IM608 and IM508 with XP400Pro.
NOTE: IMKPA is only compatible with XP400 Pro as well as 2021 newest version of IM608 (XP400), IMKPA can NOT extend the key programming function when using with old XP400 or XP200.
The IMKPA accessories kit works with the XP400Pro and supports the following functions:
Autel APB112 Smart Key Simulator Description:
The APB112 smart key simulator is used to collect the data sent from the ignition coil, aiming to identify the ignition coil troubles and decode the data of the vehicle key chip.
It can also simulate the vehicle key chip. Currently, it supports to simulate the 4D type chip. More key chip types will be supported with future upgrades.
Autel APB112 Smart Key Simulator Functions & Features:
Smart key simulator
Compatible with IM608, IM508, and MX808IM (If you try to use the Autel G-box with IM508, you need to have the XP400. Otherwise the Autel G-Box can not work with IM508)
Compact but would need to be used with the XP400
Cannot be used with the XP200
46, 4D data collection
46 smart key password calculation
46 chip simulation
Toyota 4D (94/D4, 98) smart key simulation
Toyota H (88/A8, A9, 39) smart key simulation
Collects data from the ignition coil
Identify ignition coil troubles
Decode vehicle key chip data
Simulate vehicle key chip (ex - 4D chip)
Must be used with an Autel diagnostic tool
Toyota/Lexus smart key all key lost
Chip decoding (Hyundai 46)
1 set x Autel MaxiIM IM608 Pro
1 set x Autel IMKPA Key Programming Accessories Kit
1 set x Autel APB112 Smart Key Simulator
1 set x Autel G-Box2 Adapter