Autel MaxiIM IM508 Key Programming Tool plus XP400 Pro Key and Chip Programmer, APB112 Key Simulator and G-Box2 Adapter

Product Description

Autel MaxiIM IM508 Description:

Autel MaxiIM IM508 is a professional car key programmer and immobilizer that provides extraordinary services on immobilizer systems. It could perform all keys lost, add key, key learning, remote control add, remote control learning, key chip read and write and other car related functions. The IM508 pro scan tool is capable of performing OE-Level diagnosis on all car electronic systems, covering wide vehicle coverage of over 80 American, European and Asian vehicles makes and models. The automotive diagnostic scanner also comes with most commonly used service functions like oil reset, EPB, SAS Calibration, TPMS Relearn, BMS and DPF Regeneration and etc.

Autel MaxiIM IM508 Highlights:

Why You Need Autel XP400 Pro?

1. If your original XP400 Pro for IM608 / IM600 is broken, you can buy this to replace the old one.
2. With XP400 Pro, You can release more function for your IM508: If you have a MaxiIM IM508, you want to do advanced IMMO reprogramming like IM608 do, you can buy an XP400 Pro for your machine. Then it works on IMMO functions as im608. Detailed functions Comparison between XP400 and XP200.

XP400 Pro Adds Support For Following Chips:

EEPROM-->>AMD-->>AM29FXXX series chip
EEPROM-->> FUJITSU-->> MB29FXXX series chip
EEPROM-->> ST-->> M29FXXX series chip
Engine control module-->> ST-->> M29FXXX series chip
IMMO-->> BENZ-->> ESL_W209_W906(Motorola) read / write / erase function
IMMO-->> BMW-->>EWS3 module read/write function
REMOTE_RENEW(renew key)-->> NEC-->> V51 and V5 chip read / write / erase

Autel APB112 Smart Key Simulator Functions & Features:

Smart key simulator
Compatible with IM608, IM508, and MX808IM (If you try to use the Autel G-box with IM508, you need to have the XP400. Otherwise the Autel G-Box can not work with IM508)
Compact but would need to be used with the XP400
Cannot be used with the XP200
46, 4D data collection
46 smart key password calculation
46 chip simulation
Toyota 4D (94/D4, 98) smart key simulation
Toyota H (88/A8, A9, 39) smart key simulation
Collects data from the ignition coil
Identify ignition coil troubles
Decode vehicle key chip data
Simulate vehicle key chip (ex - 4D chip)
Must be used with an Autel diagnostic tool
Toyota/Lexus smart key all key lost
Chip decoding (Hyundai 46)

AUTEL G-BOX2 Highlights:

Supports fast mode on vehicle and bench when all keys of Mercedes-Benz vehicles using the Das3 EIS/EZS are lost.
Reads and writes Bosch engine ECU on F classis of BMW and MQB of Volkswagen.
With the Autel’s Advanced Diagnostic Tablets supporting IMMO and Key Programming functions.
Autel G-Box Adapter can work on Mercedes-Benz vehicles with DAS3 CAN EIS/EZS in AKL.
Compare with other adapter Autel G-Box Adapter is more effctive to reading the ECU data from W204 and W207 EISs.
AUTEL G-BOX Adapter can support Mercedes All Key Lost BMW DME Reading.
AUTEL G-BOX Adapter use with both the Autel MaxiIM IM608, IM508 and Auro IM600.
Autel G-Box Adapter is specially designed for Mercedez-Benz vehicles with DAS3 CAN EIS/EZS in AKL.
It helps to reduce the time for reading the ECU data from W204 and W207 EISs by over 85%.

Features:

Supports Mercedes Benz All Keys Lost, faster calculate password
Supports Autel IM608 or IM508 with XP400
Used for Faster Mercedes ECU data and EIS password calculation
Mercedes DAS3 can EIS/EZS all keys lost
Reduces reading time of W204 ECU data & W207 EIS by over 85%
No need to remove and reinsert the key for W221 & W164 after 2009 models
Can read and write BMW DME/DDE ISN in boot mode
Compatible with Auro IM600 & Auro IM100 with XP400

Package List:

1 set x Autel MaxiIM IM508
1 set x Autel XP400 Pro
1 set x Autel APB112 Smart Key Simulator
1 set x Autel G-Box2 Adapter