How to Calibrate Autel EVO II Drone Remote Controller?
Matched product:
US$1,439.00€1,240.56£1,106.88AU$1,971.29C$1,918.62
- Item No. SO539
- Out Of Stock
Autel EVO II 8k records in resolutions up to 7680x4320. With 16 times more pixels compared to HD and 4 times as many pixels compared to 4k, 8k video redefine image detail.
It is recommended to calibrate the remote controller of
Autel EVO II Drone when the following situations happened:
-
The remote controller is dropped on the ground.
-
The aircraft’s flight direction does not match control inputs.
-
The remote controller automatically enters the calibration procedure when it is turned on.
Remote Controller Calibration
Step1. Turn off the EVO II aircraft and the remote controller.
Step2. Press and hold the Power Button and Take-off Button of remote controller simultaneously for 3 seconds.
Step3. You can start the calibration when the remote controller screen lights up and enters the calibration screen.
Push and hold the Command Sticks, in each of the eight possible directions until you hear a beep each time.
Step4. Turn the left Gimbal Pitch Dial counterclockwise until you hear a beep, and then clockwise until you hear a beep.
Calibration successful!
The calibration program will close automatically.