Autel MaxiSys MS906/MS906BT/MK906BT Battery Replacement Tutorial
This is a tutorial about how to change battery for Autel MaxiSys MS906/ MK906BT/ MS906BT/ MS906TS scan tool step by step.
For Autel MS906TS, MS906BT, MK906BT Tablet
-
Make sure that the new battery is good and its specification is 10000mAh 3.7V;
-
Refer to images below to stick foam on the battery, making sure that the foam is straight sticked;
-
Put the battery inside the battery cover;
-
Assemble the battery block and the bottom shell and then tighten all the screws.
For Autel MS906 Tablet
-
Make sure that the new battery is good and its specification is 5000mAh 3.7V;
-
If the battery foam also needs to be changed, please use 2pcs foam and place them inside the bottom shell with the sticky sides upward;
-
Put the battery inside the battery cover;
-
Assemble the battery block and the bottom shell and then tighten all the screws. (refer to Autel MS906BT/MK906BT step4)
Hope it helps.
Any questions welcome to contact us.
