Autel MaxiTPMS TS508 TMPS Tool Using Tips
Matched product:
US/UK/EU Ship Autel MaxiTPMS TS508 OBD TPMS Service Tool Support TPMS Relearn/ Reset, Sensor Activation, Key Fob Testing DHL Free Shipping
US$229.00
- Item No. AD123
- Free Shipping
Autel MaxiTPMS TS508 is a new generation TPMS diagnostic & service tool specially designed to activate all known TPMS sensors, read TPMS sensor status, check TPMS system health condition, program MX-sensors and conduct TPMS relearn.
Autel TS508 Quick Tech Tips
How Autel TS508 Do TPMS Relearn for Mitsubishi Mirage 2018-2020
Operation Steps
- Properly install Autel MX-Sensor 1 Sensor;
- Ensure all tires are inflated to the pressure listed on the tire placard(located in the door jam of the vehicle);
- Use the Autel TS508 tool to trigger each sensor in the following order: LF, RF, RR, LR & full size spare(if equipped);
- Turn ignition to ON position;
- Connect Autel TS508 tool to OBD port. Keeping the tool plugged into the OBD connector, take your trigger tool and proceed to trigger the sensors in the following order: LF, RF, RR, LR;
- Switch ignition OFF, then switch ignition ON;
- Test drive above 19 MPH for at least 10 minutes.
How Autel TS508 Do OBD Relearn for Ford F-150 2017 & Toyota Tundra 2014
Operation Steps
- Properly install Autel MX-Sensor 1 sensor ;
- Ensure all tires are inflated to the pressure listed on the tire placard(located in the door jam of the vehicle);
- Use the TS508 tool to trigger each sensor in the following order: LF, RF, RR, LR & full size spare(if equipped);
- Turn ignition to ON position;
- Connect TS508 tool to OBDII port to write sensor ID’s;
- Switch ignition OFF, then switch ignition ON;
- Test drive above 19 MPH at least 10 minutes.
How Autel TS508 Install New Sensors on a Chrysler with SGM
Operation Steps
- Step1. Make sure TS508 or TS508WF has the latest update;
- Step2. Use Advanced Mode to select your year make and model;
- Step3. Select option #2; Program Sensor;
- Step4. Select option #1; copy by OBD;
- Step5. Program each sensor, one-at-a-time, making sure each programmed sensor is installed in the proper wheel position;
- Step6. Service is complete!
By using the copy by OBD programming method we are using the information that is already stored in the car’s computer. We are not introducing new sensor IDs and therefore eliminating the need for a relearn. We are simply providing the sensor information that the car's computer is looking for.
