How to use Autel IM508 program VW New Beetle 2006 ID48 Key Chip

---

Purpose: key Learning
(Key learning: will first clear all working keys, then learn keys available)
Car model: VW New Beetle Car 
year: 2006
Transponder ID48 CHIP
Device: Autel MaxiIM IM508 
Steps:

Connect Autel IM508 with VW OBD2 interface, press button on scanner tablet:

IMMO >> Accept >> Volkswagen >> Expert mode >> Key learning >> Auto detect

 

Volkswagen/Lamborghini Gallardo-2005 (KWP2000) >> Auto obtain PIN/CS from engine >> OK >> Key learning

 

Enter number of keys to be learned, press “OK”.

 

Turn ignition off for 5s and then back to ON, press “OK” within 2s.

 

Key learning in progress...

 

Turn ignition off, insert each key that needs to be learned and turn ignition on for a continuous period of 2s, press “OK”.

 

Key learning completed!, press “OK”.

 

Turn ignition off, then back to ON and start the engine. If the ignition cannot be started, please wait for 5 min and then restart the engine. Press “OK”.

 

Test the keys works or not, all good, can work normally!

 

Job has done!

 

This is a procedure of ID48 key programming for a Volkswagen New Beetle 2006 with Autel IM508 Key Programmer. More vehicle tests to be updated...